Financing Available!

Financing Available!

2013 Takeuchi TB235 Mini Excavator - $29,900

This is the Cadillac of the Mini-Excavators. These Takeuchi Machines are Very Durable and they are almost Indestructible.

This One has Low Hours.

Everything works the way that it should - No Leaks, No Welds, No Cracks, No Issues.

It is Very Easy to Run & Operate. Full Lighting System so you can safely work in the dark and see what you are doing. Powerful and Fast with a Yanmar 3 Cylinder Diesel Engine - Very Economical & Very Dependable. Joy Stick Hand Controls - can be switched to ISO Configuration or to Standard Configuration.

It Has the TAG Quick Coupler Style 18" Wide Bucket with Teeth. Sitting on Excellent 14" Wide Rubber Tracks. It has the Dozer Blade for Back Filling & Grading. It Has Auxiliary Hydraulics for Extra Accessories or a Thumb.

This Machine is a little on the larger side of the Mini-Excavator group. The Width across the Tracks is 63 inches. It Weighs 7,947 Pounds. It Digs 11' 2" Deep. And it has a 17' 5" Reach.

Click here for the Specs of the machine

We have Serviced this machine and it is Ready To Work!!! It has All New Paint & New Decals. It Looks and It Runs Like It Is New!!!

It is Very Low Priced at $29,900. We do have a couple other identical 2013 Takeuchi TB235's that have been  serviced but not painted yet, and they are available for $25,900 each.
 

2013 Takeuchi TB108 Mini Excavator - $12,900

Small Machine - This Machine Can Go Into Places the Bigger Machines Can't Go. It Can Move it's Tracks Inwards to Make the Machine Narrower Than 30", Giving You the Ability to Go Thru Narrow Gates, Basement Door Ways, Between Trees, Etc.

With a Weight of 2033 Pounds, it is Easy to Haul. And it Won't Tear the Yard up When You Turn it Around.

It Only has 788 Hours on it, and it has been Very Well Maintained. It is in Excellent Condition and is Ready For Work!!!

Specifications:
Number Of Cylinders: 2
Engine Make: 2348
Engine Model: 2TNV70
Gross Power: 9.6hp
Power Measured @ 2400rpm
Displacement: 34.7cu in
Max Torque: 24.6lb ft
Torque Measured @ 1800rpm

Operational:
Operating Weight: 2033lb
Fuel Capacity: 2.5gal
Cooling System Fluid Capacity: 0.7gal
Hydraulic System Fluid Capacity: 4.1gal
Engine Oil Capacity: 0.4gal
Operating Voltage: 12V
Alternator Supplied Amperage: 9amps
Hydraulic System Relief Valve Pressure: 2288psi
Hydraulic Pump Flow Capacity: 5.6gal/min
Swing Speed: 9.3rpm

FIAT 65-B Mini-Road Grader - $25,900

FIAT ALLIS 65-B ROAD GRADER

Excellent Condition!!! This One Owner Machine was Owned by a County Road Maintenance Department in Kentucky. It Only Has 4971 Hours on it!!! We Have Fully Serviced it and it is Ready To Go To Work!!!

It is about 21 Feet Long, Has a 10 Foot Blade, and Weighs Approx 13,500 Pounds. It is One of the Smallest Production Graders on the Market and is a Top Choice For Paving Companies, Maintaining Parking Lots / Driveways / Dirt Roads, and Race Tracks. It Turns a Tight Bend which makes it Very Maneuverable and Accurate.

Super Strong Machine - 6 Cylinder Diesel Engine with 68 Horsepower. It has the Easy to Operate Powershift Transmission and Power Steering. All Functions Are Hydraulic Including Blade Lift, Blade Centering, Blade Circle Rotation /Angling, Blade Extending, and Front Wheel Lean. It Also Has the Hydraulic Scarfier for Ripping the Ground.

This Machine Has a Fully Enclosed Protection Cab with All Good Glass.

There Are NO Leaks, NO Cracks, NO Welds on This Machine. All 6 Tires are Almost New. It is in Excellent Condition and DOES NOT Need Any Repairs. It Runs Exactly the Way It Should and It is Ready For Work!!!

Genie Aerial Work Platforms

GR15 - $4,450   /   GR20 - $4,850

RUNABOUT AERIAL WORK PLATFORM - ONE PERSON MANLIFT

We Currently Have GR15 & GR20 Genies. They All Have Less Than 350 Hours Showing on them, Which is Very Low Hours.

These are Small and Very Maneuverable. The Platform Height goes up to 19' 11" giving you a Working Height of 25 feet, 11 inches. The Platform also Extends to give you more space and a further reach. Their Capacity is 350 Pounds.

Everything works the way that it should - No Leaks, No Welds, No Cracks, No Issues.

These are Very Narrow at 31.5 inches wide, so they can go thru doorways with the operator onboard. They weigh 2451 pounds so they can go on elevators. They have a zero turning radius. They can also work as a Stock Picker.

These are Very Easy to Run & Operate. Great for Changing Overhead Lights, Cleaning Skylights, Overhead Wiring, etc, etc.

These have Onboard Battery Chargers, Onboard Diagnostics, Joystick Controls, Non-Marking Tires, and have Forklight Pockets for easy Loading to Transportation.
 

Click to see: All the Machine Specs

We have Serviced these units and they are Ready To Work!!! They Look and Run Great!!!

They Are Very Low Priced at $4,450 or $4,850 per Machine - Take Your Choice - 1st Come Gets 1st Pick.
 

We Can Deliver These Locally For Free or Can Arrange Cheap Shipping If You Are Out of The Area.